PROTEK 6506

Osiloskop Analog Protek 6506 Features: 60MHz Bandwidth Alternate trigger for a stable display of unrelated signals Alt-Mag sweep for simultaneous display of the normal and X10 magnified trace Autofocus Internal sync separator circuit for stable triggering of video signals Large 6 inch CRT with internal graticule for parallax free waveform measurements Z axis input and CH 1 output Sweep speeds to 10ns/ Div 10kV acceleration voltage Specifications Vertical Amplifier ( CH 1 and CH 2) Sensitivity 5mV/ Div to 5V/ Div in 10 steps ( 1-2-5 seq) X5 Mag: 1mV/ Div to 1V/ Div Accuracy ± 3% ( ± 5% in X5 Mag) Bandwith( -3dB) DC to 60MHz Rise Time < 5.8ns Input Impedance 1MW + 25pF Input Coupling AC-Gnd-DC Invert Channel CH2 Display Modes CH1, CH2, Add, Dual Chop Frequency 250kHz ± 3% Maximum Input Voltage 400V ( DC or AC peak) CH1 Signal Output 20mV into 50W: ( 50Hz to 5MHz) Horizontal Sweep Sweep Time 0.1µ s/ Div to 0.2s/ Div in 20 calibrated steps ( 1-2-5) X10 Mag: 10ns/ Div to 20ms/ Div Accuracy ± 3% ( ± 5% in X10 Mag) Display Mode A, Alt-Mag, XY Dual Sweep Magnifier X10 ± 5% Trace Sep 1.5 Div Min Horizontal Amplifier Linearity ± 3% ( ± 5% in X10 Mag) X-Y Mode CH 1-X axis, CH 2-Y axis Sensitivity Same as CH 1 Vertical Amplifier Bandwidth DC: DC to 500kHz AC: 10Hz to 500kHz Phase Error £ 3° DC to 50kHz Triggering Source CH 1, CH 2, Line, EXT Coupling AC Modes Auto, Norm, TV-V, TV-H Slope Positive or Negative Trigger Sensitivity Int: DC to 5MHz: 0.5 Div 5MHz to 40MHz: 1.5 Div; 40MHz to 60MHz: 2.5 Div Ext: DC to 5MHz: 200mV P-P 5MHz to 40MHz: 800mV P-P 40MHz to 60MHz: 1V P-P TV: Int: 1 Div Min; Ext: 1 V P-P Min TV-H ( Television Line synchronizing Freq) TV-V ( Television Frame synchronizing Freq) Automatically switched by the A Time/ Div Front panel control External Trigger Input Impedance: 1MW + 20 pF Maximum Input Volts: 300V ( DC or AC peak) Z Axis Modulation Sensitivity ± 5V P-P Intensity increases with a negative going voltage input Bandwidth ( -3dB) DC to 2MHz Input Impedance Approx. 33 KW Maximum Input Voltage 30V ( DC or AC peak) Calibrator Signal Frequency Approx. 1kHz ( ± 20% ) Voltage 0.5V P-P ± 3% Duty Cycle Approx. 50% CRT Type 6 " rectangular CRT with illuminated internal 8 X 10 Div graticule ( 1 Div = 1cm) Acceleration Voltage 10 kV General Specification Power Requirements AC Input Voltage: 100V, 120V, 220V, 240V ± 10% selectable Frequency 50/ 60Hz Power Consumption 55W Operating Temperature 0 to 40° C DIMensions 5.3 " H x 13.4 " W x 14.8 " D Weight 24 lbs. Supplied Accessories Manual, AC Power cord, ( 2) X1/ X10 Probes